Material testing equipment configured for your test method and specimen.

DERUI manufactures material testing equipment for quality control and R&D.
WhatsApp Consultation：+86 135 2795 8363
HomeResources
Small Tensile Tester Selection: Low-Force Measurement, Grips and Travel

Small Tensile Tester Selection: Low-Force Measurement, Grips and Travel

October 21, 2026

01 / BUYER’S GUIDE Small Force Needs More Than a Small Frame When a specimen breaks at a low force, the largest capacity on the brochure is only one part of equipment selection. The useful question...
How to Choose a Bursting Strength Tester for Paper and Board

How to Choose a Bursting Strength Tester for Paper and Board

October 21, 2026

01 / BUYER’S GUIDE Choose the Test Head Before Comparing Prices A paper and board bursting strength tester is a measurement system: pressure sensor, hydraulic delivery, diaphragm, clamps and the re...
Fabric Tensile Testing: Grab vs Strip Methods and Equipment Selection

Fabric Tensile Testing: Grab vs Strip Methods and Equipment Selection

October 21, 2026

01 / BUYER’S GUIDE Grab and Strip Tests Answer Different Questions Grab and strip tensile tests both load fabric to assess breaking behaviour, but they grip the specimen differently. Their results ...
How to Select a Tensile Testing Machine for PP Ropes

How to Select a Tensile Testing Machine for PP Ropes

October 21, 2026

01 / BUYER’S GUIDE Start with the Rope Assembly You Need to Test A PP rope tensile testing machine must be specified around the complete specimen, including its end connections. Nominal rope diamet...
Benchtop Tensile Tester Selection Guide

Benchtop Tensile Tester Selection Guide

September 7, 2026

COMPACT UNIVERSAL TESTING MACHINE GUIDE Benchtop Tensile Tester Selection Guide A benchtop tensile tester is selected as a complete test system—not by frame capacity alone. Begin with the specimen ...
ASTM D1922 vs ISO 6383-2: Film Tear Test Guide

ASTM D1922 vs ISO 6383-2: Film Tear Test Guide

August 24, 2026

Plastic Film Testing · Method Selection · Laboratory Guide ASTM D1922 vs ISO 6383-2: Elmendorf Tear Testing for Plastic Film How to select the governing method, prepare rectangular or constant-radi...
ASTM D6055 Clamp Testing: Package Setup, Force Control and Equipment Selection

ASTM D6055 Clamp Testing: Package Setup, Force Control and Equipment Selection

August 24, 2026

Packaging Testing · Mechanical Handling · Equipment Selection ASTM D6055 Clamp Testing: Package Setup, Force Control and Equipment Selection A practical guide to Method C, squeeze-clamp hazards, co...
ASTM D999 vs ASTM D4728: Fixed-Displacement or Random Vibration

ASTM D999 vs ASTM D4728: Fixed-Displacement or Random Vibration

August 24, 2026

Packaging Testing · Method Selection · Equipment Guide ASTM D999 vs ASTM D4728: Fixed-Displacement or Random Vibration? A practical guide to separating repetitive-shock, resonance and random-vibrat...
ISO 2758 vs ISO 2759: How to Choose a Bursting Strength Test Method

ISO 2758 vs ISO 2759: How to Choose a Bursting Strength Test Method

August 23, 2026

Paper & Board Testing · Method Selection · Laboratory Guide ISO 2758 vs ISO 2759: How to Choose a Bursting Strength Test Method A practical guide to selecting the correct method for paper, line...
Incline Impact Test: ASTM D880 Procedure, Equipment Setup, and Result Interpretation

Incline Impact Test: ASTM D880 Procedure, Equipment Setup, and Result Interpretation

August 19, 2026

Packaging Testing · Horizontal Shock · Laboratory Guide Incline Impact Test: ASTM D880 Procedure, Equipment Setup, and Result Interpretation A practical guide to selecting the method, controlling i...
Foam Durability and Fatigue Testing: Methods, Standards, and Best Practices

Foam Durability and Fatigue Testing: Methods, Standards, and Best Practices

July 28, 2026

Key Takeaways Foam fatigue testing simulates years of use in a controlled laboratory environment ASTM D3574 and ISO standards define standardized fatigue test procedures Compression set and height ...
Servo Hydraulic UTM Selection Guide for Buyers

Servo Hydraulic UTM Selection Guide for Buyers

July 15, 2026

Servo-Hydraulic vs Electromechanical UTMs When I am choosing a servo-hydraulic UTM, I look at the job first: the force level, the specimen size, and whether the lab needs a system built for heavy-d...
Cornell vs Rollator Mattress

Cornell vs Rollator Mattress

July 14, 2026

Furniture Testing · Mattress Durability · 2026 Edition Cornell vs Rollator Mattress Testing: Which Method Actually Predicts Real-World Failure? Two durability testing methods. Two entirely differen...
Testing Machine Calibration Guide

Testing Machine Calibration Guide

July 14, 2026

Testing Equipment · Standards & Compliance · 2026 Edition Testing Machine Calibration Guide: ASTM E4 & ISO 7500-1 The complete guide to keeping your testing machines accurate, compliant, an...
Foam Fatigue Testing

Foam Fatigue Testing

July 14, 2026

Foam Testing · Quality & Durability · 2026 Edition Foam Fatigue Testing: Why It Matters The critical quality step most manufacturers overlook — and the real cost when you skip it. Last updated:...
UTM Selection Guide

UTM Selection Guide

July 14, 2026

Equipment Selection Guide · 2026 Edition Universal Testing Machine Selection Guide Electromechanical or servo-hydraulic? Single or dual column? 5 kN or 600 kN? A complete decision framework with 5-...
How to Build Packaging Test Lab

How to Build Packaging Test Lab

July 14, 2026

Laboratory Setup Guide · 2026 Edition How to Build a Packaging Test Lab A complete, actionable guide covering equipment checklists by budget, space planning, ISTA/ISO 17025 certification paths, sta...
Vibration Tester vs Drop Tester

Vibration Tester vs Drop Tester

July 14, 2026

Packaging Test Equipment Selection · 2026 Edition Vibration Tester vs Drop Tester A complete comparison guide for packaging engineers: when to use each, ISTA/ASTM standards requirements, cost analy...
Drop Tester Types Comparison

Drop Tester Types Comparison

July 14, 2026

Equipment Selection Guide · 2026 Edition Drop Tester Types Comparison A complete drop test equipment selection guide covering 7 types, standards compatibility, industry applications, and cost analy...
Box Compression Tester Guide: Specifications, Standards & How to Choose

Box Compression Tester Guide: Specifications, Standards & How to Choose

June 20, 2026

Buying Guide 2026 Edition · ~13 min read · 2,300+ words Box Compression Tester Guide: Specifications, Standards & How to Choose A technical buyer's guide covering ASTM D642 and ISO 12048 compliance...

Derui Test Equipment
We are a dedicated manufacturer of precision material testing equipment, committed to supporting global industries with reliable testing solutions.

Our Core Product Lines:

  • Universal Testing Machines (Tensile/Bend/Compression)

  • Environmental Simulation Chambers (Climatic, Thermal Shock)

  • Specialized Testing Equipment for Packaging, Furniture & Materials

Contact Us

Derui Testing Equipment Co., Ltd.

No. 5, Seventh Street, Jintan
Dongguan City, Guangdong Province ,523000,China.

Tel: +86-769-81330059

WhatsApp: +86 135 2795 8363

Email: shirley@deruitest.com

For international inquiries, we recommend WhatsApp or Email for swift response.

WhatsApp

Copyright © 2025, Derui Material Testing Equipment Manufacturer All Rights Reserved.

WhatsAppWhatsApp
WhatsApp
MessageMessage

Send Inquiry